Real-time assessment of carbon nanotube alignment in a polymer matrix under an applied electric field via polarized Raman spectroscopy

A technique has been developed utilizing polarized Raman spectroscopy to measure alignment of carbon nanotubes in situ in a polymer matrix under an applied electric field. Previous studies of alignment have been restricted to optically transparent solvents or polymerized specimens that prevent accurate analyses of alignment dynamics in polymers. The effects of electric field strength on the degree of alignment and the time to achieve an aligned state are discussed. The use of in situ, real-time polarized Raman spectroscopy provides a non-invasive technique for assessing carbon nanotube alignment, which can assist in determining processing conditions to improve the mechanical and electrical properties of aligned nanocomposites.     

PN结物理特性的开放式测量实验方法研究

开放式、综合性量测实验的设计与应用,在巩固基础理论知识的同时,能够有效培养学生的动手实践能力、数据处理及分析能力,一定程度代表着大学物理实验课程的教学模式改革方向。以PN结物理特性的测量实验为例,基于通用型仪器与元器件的积木式组合,设计出简单、适用的实验电路;t=17.95℃时所采集的原始实验数据经三种模式回归分析,比较验证了PN结扩散电流与电压间遵循的玻尔兹曼分布律;计算出的玻尔兹曼常数与FD-PN-4测定仪的量测值相比,其结果说明了开放式测量实验方法的有效性。     

Development of in-wheel sensor system for accurate measurement of wheel terrain interaction characteristics

Planetary rovers need high mobility on a rough terrain such as sandy soil, because such a terrain often impedes the rover mobility and causes significant wheel slip. Therefore, the accurate estimation of wheel soil interaction characteristics is an important issue. Recent studies related to wheel soil interaction mechanics have revealed that the classical wheel model has not adequately addressed the actual interaction characteristics observed through experiments. This article proposes an in-wheel sensor system equipped with two sensory devices on the wheel surface: force sensors that directly measure the force distribution between the wheel and soil and light sensors that accurately detect the wheel soil surface boundary line. This sensor design enables the accurate measurement of wheel terrain interaction characteristics such as wheel force distribution, wheel–soil contact angles, and wheel sinkage when the powered wheel runs on loose sand. In this article, the development of the in-wheel sensor system is introduced along with its system diagram and sensor modules. The usefulness of the in-wheel sensor system is then experimentally evaluated via a single wheel test bench. The experimental results confirm that explicit differences can be observed between the classical wheel model and practical data measured by the in-wheel sensor system.     

Construction Theory of Function on Local Fields

We establish the construction theory of function based upon a local field K p as underlying space. By virture of the concept of pseudo-differential operator, we introduce "fractal calculus"(or, p-type calculus, or, Gibbs-Butzer calculus). Then, show the Jackson direct approximation theorems, Bermstein inverse approximation theorems and the equivalent approximation theorems for compact group D( Kp) and locally compact group K+p(= Kp), so that the foundation of construction theory of function on local fields is established. Moreover, the Jackson type, Bernstein type,and equivalent approximation theorems on the H ?lder-type space Cσ(Kp), σ 0, are proved; then the equivalent approximation theorem on Sobolev-type space Wrσ(Kp),σ≥ 0, 1 ≤ r +∞, is shown.     

超音速等离子体炬的磁流体动力学数值研究

针对设计的喉径2mm、工作电流为100A的拉瓦尔喷嘴,在二维轴对称模型的基础上,对超音速等离子体炬中的流动及其外部射流进行了数值模拟。通过在阳极喷嘴内部采用基于磁矢量势的磁流体动力学模型,避免了对磁感应强度的复杂积分计算,得到了喷嘴内部多场耦合的结果及外部射流的流动状态,分析了喷嘴内部电磁场对等离子体的加速作用及射流发展过程。结果显示,等离子体经历了亚音速→跨音速→超音速的发展过程,最终获得2.3 Ma的超音速射流。研究结果为超音速等离子体炬的工业应用提供了理论基础。     

MHD flow and heat transfer of a hybrid nanofluid past a permeable stretching/shrinking wedge

The steady flow and heat transfer of a hybrid nanofluid past a permeable stretching/shrinking wedge with magnetic field and radiation effects are studied. The governing equations of the hybrid nanofluid are converted to the similarity equations by techniques of the similarity transformation. The bvp4c function that is available in MATLAB software is utilized for solving the similarity equations numerically. The numerical results are obtained for selected different values of parameters. The results discover that two solutions exist, up to a certain value of the stretching/shrinking and suction strengths. The critical value in which the solution is in existence decreases as nanoparticle volume fractions for copper and wedge angle parameter increase. It is also found that the hybrid nanofluid enhances the heat transfer rate compared with the regular nanofluid. The reduction of the heat transfer rate is observed with the increase in radiation parameter. The temporal stability analysis is performed to analyze the stability of the dual solutions, and it is revealed that only one of them is stable and physically reliable.     

Stability of equilibrium solutions of a double power reaction-diffusion equation with a Dirac interaction

In this paper, information about the instability of equilibrium solutions of a nonlinear family of localized reaction-diffusion equations in dimension one is provided. More precisely, explicit formulas to the equilibrium solutions are computed and, via analytic perturbation theory, the exact number of positive eigenvalues of the linear operator associated to the stability problem is analyzed. In addition, sufficient conditions for blow up of the solutions of the equation are also discussed.     

Sommerfeld-type integrals for discrete diffraction problems

Three problems for a discrete analog of the Helmholtz equation are studied analytically using the plane wave decomposition and the Sommerfeld integral approach. They are: (1) the problem with a point source on an entire plane; (2) the problem of diffraction by a Dirichlet half-line; (3) the problem of diffraction by a Dirichlet right angle. It is shown that the total field can be represented as an integral of an algebraic function over a contour drawn on some manifold. The latter is a torus. As a result, explicit solutions are obtained in terms of recursive relations (for the Green’s function), algebraic functions (for the half-line problem), or elliptic functions (for the right angle problem).     

多种分布下选择后变量显著性分析及其在CEPS数据中的应用

在使用变量选择方法选出模型后,如何评价模型中变量系数的显著性是统计学重点关注的前沿问题之一.文章从适应性Lasso变量选择方法的选择结果出发,在考虑实践中误差分布多样性的前提下,基于选择事件构造了模型保留变量系数的条件检验统计量,并给出了该统计量的一致收敛性质的证明过程.模拟研究显示,在多种误差分布下所提方法均可进一步优化变量选择结果,有较强的实用价值.应用此方法对CEPS学生数据进行了实证分析,最终选取了学生认知能力等10个变量作为影响中学生成绩的主要因素,为相关研究提供了有益的参考.